Preface
Safety precautions and regulations
HeatMiser II
Installation guide. © 2014, all rights reserved
P a g e
|
4
PREFACE
HeatMiser II has been engineered and manufactured according to the highest standards for
reliability, durability, ease of installation, operation and safety. With proper care, HeatMiser II
will heat your pool and water during your swimming season for many years to come. Thank you
for purchasing HeatMiser II.
BEFORE assembling and installing the collector, please take the time to read the following
instructions to ensure a smooth and successful installation and operation. Retain this
installation manual for future use.
Read all safety and operation guidelines. Failure to do so could result in serious
personal injury or damage to the pool and/or collector.
SAFETY PRECAUTIONS AND REGU LATIONS
Warning! Position the solar collector so that is cannot be used by children to obtain
access to the pool.
Warning! Check with local and state codes and regulations regarding installation of
Solar Pool Heating Systems.
Avoid stepping on the panels.
Do not allow children to operate the solar collector.
Always turn the filter system off when installing, working on, or servicing the solar
collector.
Do not use any petroleum based lubricant to clean the product as it may damage it.
Be sure to place your pool cover on at night and whenever the pool is not in use to
prevent heat loss and to retain the heat generated by the solar collector during the day.
Circulating the water through the collector at inappropriate climate conditions might cool
the pool water, therefore at cooler climates or at night make sure pool pump is turned
off.
