1
INSTALLATION INSTRUCTIONS
PART NAME :
VEHICLE :
PART NUMBER :
GENUINE Mazda Mobile Start
Thank you for purchasing a genuine Mazda accessory.
Before removal and installation, be sure to thoroughly read these instructions. Please read the contents of this
booklet in order to properly install and use the Mazda Mobile Start. Your safety depends on it.
Keep these instructions with your vehicle records for future reference.
•
There are several
WARNING
and
CAUTION
sections in this booklet concerning safely when installing or
removing the Mazda Mobile Start. Always read and follow them in order to prevent injuries, accidents, and possible
damage to the vehicle.
WARNING:
Indicates a situation in which serious injury or death could result if the warning is ignored.
CAUTION:
Indicates a situation in which bodily injury or damage to the vehicle could result if the caution is ignored.
•
For areas indicating the tightening torque in this instruction manual, tighten to the specified torque using a torque wrench. For
areas in which the tightening torque is indicated inside parentheses ( ), the tightening torque is indicated as a reference value,
however tightening using a torque wrench is not necessary.
•
Do not modify the Mazda Mobile Start.
•
Do not install the Mazda Mobile Start in any way other than described in the following instructions.
•
If in any doubt, please ask your Mazda dealer to install the accessory in order to prevent errors in installation.
•
If you have any questions about the use of the accessory, ask your Mazda dealer for proper advice before using it.
•
Mazda and its suppliers are not responsible for injuries, accidents, and damage to persons and property that arise from the
failure of the dealer or installer to follow these instructions.
•
To ensure safety and reliability of the work, installation, removal and disposal work must carried out by an Authorized Mazda
Dealership.
•
Be careful not to lose removed parts, and be sure that they are kept free from scratches, grease or other dirt.
WARNING
090003-33280700
NOTE
To the dealer
• Please turn over these instructions to the customer after installation.
To the customer
• Keep these instructions after installation. The instructions may be necessary for
installing other optional parts or removal of this accessory.
• Should the vehicle or this accessory be resold, always leave these instructions
with it for the next owner.
Mazda Mobile Start (MMS)
Mazda CX-3 / Mazda2
0000-8F-Z80 (MMS ECU Kit)
0000-8F-P07 (MMS Harness Kit)
[KD53-V7-629 (Hood Switch)]
