Mazda BT-50 2017 Owner'S Manual Download

Page: 249 / 322

Black plate (251,1)

SETTING THE CLOCK
ON THE AUDIO UNIT

Changing the time

The clock can be set at any time when the
system is in the one hour mode or the
ignition switch is in the ACC or ON
position.

NOTE

Type 2 and 3:

The time can be adjusted

using the hour and minute buttons on
the screen.

To advance the hours, press the HOUR
SET button. To advance the minutes,
press the MINUTE SET button while the
time is flashing.

NOTE

Type 4:

The time can be adjusted

using the clock button on the audio
control panel. See

Audio unit

overview

(page 235).

The time can be adjusted using the
navigation arrow buttons on the
audio control panel.

Type 1

Press the MENU button.

Rotate the VOLUME CONTROL to
select the date/time.

Short press the MENU button to enter
date/time.

Rotate the VOLUME CONTROL to
select the hour set and enter.

Rotate the VOLUME CONTROL to
adjust the hours.

Press BACK button to return to
previous menu.

Rotate the VOLUME CONTROL to
select minute set and enter.

Rotate the VOLUME CONTROL to
adjust minutes.

Press MENU button to save the new
settings.

Type 2 and 4

Press the MENU button.

Use the UP and DOWN arrow buttons
to select the clock settings.

Press OK or RIGHT arrow button to
enter clock settings.

Use UP and DOWN arrow button to
select the set time.

Use UP and DOWN arrow buttons to
adjust hours.

Use RIGHT and LEFT arrow buttons to
scroll to the minutes.

Use UP and DOWN arrow buttons to
adjust minutes.

Press OK button to save the new
settings

Type 3

Press the MENU button.

Use the UP and DOWN arrow buttons
to select the clock.

Press OK or RIGHT arrow button to
enter clock menu.

Use UP and DOWN arrow button to
select the set time.

Audio unit clock and date displays

243

Mazda BT-50_8FX5-EI-17DT_Edition2 Page251
Thursday, May 11 2017 5:34 PM

Form No.8FX5-EI-17DT

Summary of Contents for BT-50 2017



































































































































































































































































































































Search results

Summary of Contents for BT-50 2017

Reviews:

Related manuals for BT-50 2017

Brands by name

Popular brands

Mazda BT-50 2017, Owner'S Manual

Search results

Summary of Contents for BT-50 2017

Reviews:

Related manuals for BT-50 2017

Brands by name

Popular brands