Black plate (255,1)
3. Press OK to continue listening to a
station.
q
Scan tuning
Scan allows you to listen to a few seconds
of each station detected.
Type 1
1. Press the FM/AM button.
2. Short press the SCAN/AS button, the
radio will automatically scan up the
selected waveband.
3. Short press the SCAN/AS button again
to continue listening to a station.
Type 2
1. Press the MENU button.
2. Select RADIO mode and then SCAN.
3. Use the seek buttons to scan up or
down the selected waveband.
4. Press OK to continue listening to a
station.
Type 3 and 4
1. Press function button 3.
2. Use the seek buttons to scan up or
down the selected waveband.
3. Press function button 3 again or OK to
continue listening to a station.
STATION PRESET
BUTTONS
This feature allows you to store your
favourite stations so that they can be
recalled by selecting the appropriate
waveband and pressing one of the preset
buttons.
1. Select a waveband.
2. Tune to the station required.
3. Press and hold one of the preset
buttons. A progress bar and message
will appear. When the progress bar
completes the station has been stored.
The audio unit will also mute
momentarily as confirmation.
This can be repeated on each waveband
and for each preset button.
NOTE
When you drive to another part of the
country, FM stations that broadcast on
alternative frequencies, and are stored
on preset buttons, may be updated with
the correct frequency and station name
for that area.
Audio unit operation
247
Mazda BT-50_8FX5-EI-17DT_Edition2 Page255
Thursday, May 11 2017 5:34 PM
Form No.8FX5-EI-17DT
