Mazda CX-3 Owner'S Manual Download | Manualshive

Page: 195 / 785

background image

NOTE

x

The engine cannot be started unless
the clutch pedal is fully depressed
(manual transaxle) or the brake
pedal is fully depressed (automatic
transaxle).

x

If there is a malfunction with the
push button start function, the push
button start indicator light (amber)
flashes. In this case, the engine may
start, however, have the vehicle
checked at an expert repairer (we
recommend an Authorised Mazda
Repairer) as soon as possible.

x

If the push button start indicator
light (green) does not illuminate,
perform the operation from the
beginning again. If it does not
illuminate, have the vehicle checked
at an expert repairer (we recommend
an Authorised Mazda Repairer).

x

To switch the ignition position
without starting the engine, perform
the following operations after the
push button start indicator light
(green) turns on.
1. Release the clutch pedal (manual

transaxle) or brake pedal
(automatic transaxle).

2. Press the push button start to

switch the ignition position. The
ignition switches in the order of
ACC, ON, and off each time the
push button start is pressed. To
switch the ignition position
again, perform the operation
from the beginning.

▼

Emergency Operation for Starting
the Engine

If the KEY warning light (red) illuminates,
or the push button start indicator light
(amber) flashes, this could indicate that
the engine may not start using the usual
starting method. Have your vehicle
inspected at an expert repairer (we
recommend an Authorised Mazda
Repairer) as soon as possible. If this
occurs, the engine can be force-started.
Press and hold the push button start until
the engine starts. Other procedures
necessary for starting the engine such as
having the key in the cabin, and
depressing the clutch pedal (manual
transaxle) or the brake pedal (automatic
transaxle) are required.

When Driving

Start/Stop Engine

4-10

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

«
...
193
194
195
196
197
...
»

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-3

Brand: Panasonic Pages: 2

CYRC50U - UNIVERSAL REAR-VIEW CAMERA

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 12

Electronic Parking Disc 3

Brand: Jacob Jensen Pages: 2

Brand: Yakima Pages: 12

Brand: FormFit Pages: 4

Chevrolet Silverado 2500HD 2021

Brand: GMC Pages: 433

Polaris TATOU 4S

Brand: Camoplast Pages: 13

Brand: Renault Pages: 340

2014 Grand Cherokee SRT8

Brand: Jeep Pages: 596

Brand: Skoda Pages: 4

Brand: Yakima Pages: 9

Brand: Maserati Pages: 302

Brand: Anker Technology Pages: 8

Brand: Skoda Pages: 2

Brand: Connects2 Pages: 8

DH-RB 05.02 Series

Brand: Dhollandia Pages: 65

Brand: Brainz Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands