Mazda CX-3 Owner'S Manual Download

Page: 358 / 785

CAUTION

In the following cases, turn the system o

to prevent a mis-operation:

The vehicle is being towed or when towing another vehicle.

The vehicle is on a chassis roller.

When driving on rough roads such as in areas of dense grass or o

-road.

Refer to Stopping the Advanced Smart City Brake Support (Advanced SCBS) System Operation

on page 4-174 on how to turn o

the Advanced SCBS system.

NOTE

The Advanced SCBS system will operate under the following conditions.

The engine is running.

The Smart City Brake Support (SCBS) warning light (amber) does not illuminate.

(Object is vehicle ahead)

The vehicle speed is between about 4 to 80 km/h (2 to 50 mph).

(Object is a pedestrian)

The vehicle speed is between about 10 to 80 km/h (6.2 to 50 mph).

The Advanced SCBS system is not turned off.

Under the following conditions, the Advanced SCBS system may not operate normally:

The Advanced SCBS system will not operate if the driver is deliberately performing
driving operations (accelerator pedal and steering wheel).

If there is the possibility of partial contact with a vehicle ahead.

The vehicle is driven on a slippery road surface such as wet roads or icy or snow-bound
roads.

The braking performance is adversely affected due to cold temperatures or wet brakes.

The vehicle is driven at the same speed as the vehicle ahead.

The accelerator pedal is depressed.

The brake pedal is depressed.

The steering wheel is being operated.

The selector lever is being operated.

In the following cases, the Advanced SCBS may operate.

Objects on the road at the entrance to a curve.

Vehicles passing in the opposite lane while making a curve.

When passing through a toll gate.

When passing through low gates, narrow gates, car washing machines, or tunnels.

If you suddenly come close to a vehicle ahead.

2-wheeled vehicles, animals, or standing trees.

When Driving

i-ACTIVSENSE

4-173

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands