Mazda CX-3 Owner'S Manual Download

Page: 400 / 785

Tra

ffi

c Sign Recognition System (TSR)

Advanced Smart City Brake Support (Advanced SCBS)

Smart City Brake Support [Forward] (SCBS F)

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function)

Smart Brake Support (SBS)

The direction in which the Forward Sensing Camera (FSC) is pointed has been

nely

adjusted. Do not change the installation position of the Forward Sensing Camera (FSC) or

remove it. Otherwise, it could result in damage or malfunction.

Always use tyres for all wheels that are of the speci

ed size, and the same manufacturer,

brand, and tread pattern. In addition, do not use tyres with signi

cantly di

erent wear

patterns on the same vehicle as the system may not operate normally.

The Forward Sensing Camera (FSC) includes a function for detecting a soiled windscreen

and informing the driver, however, depending on the conditions, it may not detect plastic

shopping bags, ice or snow on the windscreen. In such cases, the system cannot accurately

determine a vehicle ahead and may not be able to operate normally. Always drive carefully

and pay attention to the road ahead.

NOTE

In the following cases, the Forward Sensing Camera (FSC) cannot detect target objects
correctly, and each system may be unable to operate normally.

The height of the vehicle ahead is low.

You drive your vehicle at the same speed as the vehicle ahead.

Headlights are not turned on during the night or when going through a tunnel.

In the following cases, the Forward Sensing Camera (FSC) may not be able to detect
target objects correctly.

Under bad weather condition, such as rain, fog and snow.

The window washer is being used or the windscreen wipers are not used when it's
raining.

Ice, fog, snow, frost, rainfall, dirt, or foreign matter such as a plastic bag is stuck on the
windscreen.

Trucks with low loading platforms and vehicles with an extremely low or high profile.

When driving next to walls with no patterning (including fences and longitudinally
striped walls).

The tail lights of the vehicle ahead are turned off.

A vehicle is outside the illumination range of the headlights.

The vehicle is making a sharp turn, or ascending or descending a steep slope.

Entering or exiting a tunnel.

Heavy luggage is loaded causing the vehicle to tilt.

Strong light is shone at the front of the vehicle (back light or high-beam light from
on-coming vehicles).

When Driving

i-ACTIVSENSE

4-215

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands