Mazda CX-3 Owner'S Manual Download | Manualshive

Page: 43 / 785

background image

If Trouble Arises

40

If Trouble Arises

• Flat Tyre

If you have a flat tyre, drive slowly to a level spot that is well off the road and
out of the way of traffic to change the tyre.
Use the emergency flat tyre repair kit to repair the tyre temporarily or use the
temporary spare tyre.

• Overheating

1. Drive safely to the side of the road and park off the right-of-way.
2. Check whether coolant or steam is escaping from the engine compartment.

If steam is coming from the engine compartment:

Do not go near the front of the vehicle. Stop the engine.
Wait until the steam dissipates, then open the bonnet and start the engine.

If neither coolant nor steam is escaping:

Open the bonnet and idle the engine until it cools.

• Towing Description

We recommend that towing be done only by an expert repairer, we recommend
an Authorised Mazda Repairer or a commercial tow-truck service.

• Warning Lights and Warning Sounds

If a warning light illuminates or flashes or a warning sound is heard, check for
details concerning the warning light or sound in this guide. If the problem
cannot be resolved, contact an Authorised Mazda Repairer.

For details, refer to Section 7, “Flat Tyre”, “Overheating”, “Emergency Towing” or
“Warning/Indicator Lights and Warning Sounds”.

CX-3̲8GT4EE18D̲Edition8̲QuickGuide.indb 42

CX-3̲8GT4EE18D̲Edition8̲QuickGuide.indb 42

2019/11/22 9:08:02

2019/11/22 9:08:02

«
...
41
42
43
44
45
...
»

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-3

Brand: Mazda Pages: 4

Brand: Camoplast Pages: 60

Brand: Hama Pages: 6

Wallbox eM4 Single

Brand: ABL Pages: 68

Brand: Daewoo Pages: 68

Brand: Hyundai Pages: 437

PICASSO XSARA DESIRE 1.6 - MESUREMENT

Brand: CITROEN Pages: 2

Brand: TBC Pages: 12

Crossland X 2017

Brand: Vauxhall Pages: 245

Brand: BraunAbility Pages: 46

IT FITS RBO1018

Brand: RBO Pages: 36

Brand: Gentex Pages: 2

2005-2009 Chrysler 300C

Brand: Mopar Pages: 7

Brand: Ford Pages: 51

Brand: Poison Spyder Pages: 5

Brand: Westin Pages: 3

Brand: STO N SHO Pages: 7

Brand: Cadillac Pages: 339

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands