Mazda CX-3 Owner'S Manual Download

Page: 493 / 785

▼

Bluetooth

audio device information

display

If a Bluetooth

audio device is connected,

the following information is displayed in
the audio display.

Category

AVRCP Ver.

lower than 1.3

AVRCP

Ver. 1.3

Device name

Title

—

Artist name

—

Album name

—

File number

—

Playback time

—

Folder number

—

X: Available
—: Not available

NOTE

Some information may not display
depending on the device, and if the
information cannot be displayed, “NO
TITLE” is indicated.

Bluetooth

Hands-Free

▼

Making a Call

Phonebook Usage

Telephone calls can be made by saying the
name of a person (voice tag) whose phone
number has been registered in Bluetooth

Hands-Free in advance. Refer to
Phonebook registration.
1. Press the pick-up button or talk button

with a short press.

Say:

[Beep] “Call”

Prompt:

“Name please.”

Say:

[Beep] “XXXXX... (Ex. “John's

phone”)” (Say a voice tag registered in
the phonebook.)

Prompt:

“Calling XXXXX... (Ex.

“John's phone”) XXXX (Ex. “at
home”). Is this correct?” (Voice tag
and phone number location registered
in phonebook).

Say:

[Beep] “Yes”

Prompt:

“Dialing”

NOTE

The “Call” command and the voice tag
can be combined.
Ex. In Step 2, say, “Call John's phone”,
then, Steps 3 and 4 can be skipped.

Phonebook registration

Phone numbers can be registered to the
Bluetooth

Hands-Free phonebook.

NOTE

Do this function only when parked. It is
too distracting to attempt while driving
and you may make too many errors to be
effective.

Interior Features

Audio Set [Type A (non-touchscreen)]

5-58

*Some models.

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands