Mazda CX-3 Owner'S Manual Download | Manualshive

Page: 568 / 785

background image

Things You Need to Know

WARNING

Always adjust the audio while the vehicle is

stopped:

Do not adjust the audio control switches

while driving the vehicle. Adjusting the

audio while driving the vehicle is

dangerous as it could distract your

attention from the vehicle operation which

could lead to a serious accident.

Even if the audio control switches are

equipped on the steering wheel, learn to

use the switches without looking down at

them so that you can keep your maximum

attention on the road while driving the

vehicle.

CAUTION

For the purposes of safe driving, adjust the

audio volume to a level that allows you to

hear sounds outside of the vehicle

including car horns and particularly

emergency vehicle sirens.

NOTE

x

To prevent the battery from being
discharged, do not leave the audio
system on for a long period of time when
the engine is not running.

x

If a cellular phone or CB radio is used
in or near the vehicle, it could cause
noise to occur from the audio system,
however, this does not indicate that the
system has been damaged.

Do not spill any liquid on the audio
system.

Do not insert any objects, other than CDs,
into the slot.

▼

Radio Reception

AM characteristics

AM signals bend around such things as
buildings or mountains and bounce off the
ionosphere.
Therefore, they can reach longer distances
than FM signals.
Because of this, 2 stations may sometimes
be picked up on the same frequency at the
same time.

Station 2

Station 1

Ionosphere

Interior Features

Appendix

5-133

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

«
...
566
567
568
569
570
...
»

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-3

Brand: ABL Pages: 176

Brand: ABL Pages: 94

Brand: kaarta Pages: 29

KO PROPO RTF 2002 ESC

Brand: Tamiya Pages: 2

CARPOWER CAP-12XHQ

Brand: Monacor Pages: 5

Grand Cherokee WK2

Brand: Jeep Pages: 338

WirelessAIR 73000EZ

Brand: Air Lift Pages: 12

Brand: Thule Pages: 8

Chevrolet Silverado 2500HD 2021

Brand: GMC Pages: 433

Brand: Caltrend Pages: 2

Brand: Audiovox Pages: 1

EGR-3PVE-COLOUR

Brand: EGR Pages: 28

Brand: Cadillac Pages: 368

Brand: Luverne Pages: 3

Brand: Navman Pages: 27

Brand: Kia Pages: 51

Brand: Caltrend Pages: 3

Brand: SAFARI Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands