Mazda CX-3 Owner'S Manual Download

Page: 629 / 785

Keep all

ames and sparks away from open battery cells because hydrogen gas is

produced from open battery cells while charging the battery or adding battery

uid:

Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced during

normal battery operation, could ignite and cause the battery to explode. An exploding battery

can cause serious burns and injuries. Keep all

ames including cigarettes and sparks away

from open battery cells.

NOTE

Before performing battery maintenance, remove the battery cover.

▼

Battery Maintenance

To get the best service from a battery:

Keep it securely mounted.

Keep the top clean and dry.

Keep terminals and connections clean,
tight, and coated with petroleum jelly or
terminal grease.

Rinse off spilled electrolyte immediately
with a solution of water and baking
soda.

If the vehicle will not be used for an
extended time, disconnect the battery
leads and charge the battery every 6
weeks.

Maintenance and Care

Owner Maintenance

6-38

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands