background image

¾

Do not spray water in the engine

compartment. Otherwise, it could result

in engine-starting problems or damage

to electrical parts.

¾

When washing and waxing the vehicle,

be careful not to apply excessive force to

any single area of the vehicle roof or the

aerial. Otherwise, you could dent the

vehicle or damage the aerial.

To help protect the finish from rust and
deterioration, wash your Mazda
thoroughly and frequently, at least once a
month, with lukewarm or cold water.
 
If the vehicle is washed improperly, the
paint surface could be scratched. Here are
some examples of how scratching could
occur.
 
Scratches occur on the paint surface when:

x

The vehicle is washed without first
rinsing off dirt and other foreign matter.

x

The vehicle is washed with a rough, dry,
or dirty cloth.

x

The vehicle is washed at a car wash that
uses brushes that are dirty or too stiff.

x

Cleansers or wax containing abrasives
are used.

NOTE

x

Mazda is not responsible for scratches
caused by automatic car washes or
improper washing.

x

Scratches are more noticeable on
vehicles with darker paint finishes.

To minimize scratches on the vehicle's
paint finish:

x

Rinse off any dirt or other foreign matter
using lukewarm or cold water before
washing.

x

Use plenty of lukewarm or cold water
and a soft cloth when washing the
vehicle. Do not use a nylon cloth.

x

Rub gently when washing or drying the
vehicle.

x

Take your vehicle only to a car wash
that keeps its brushes well maintained.

x

Do not use abrasive cleansers or wax
that contain abrasives.

CAUTION

¾

Do not use steel wool, abrasive cleaners,

or strong detergents containing highly

alkaline or caustic agents on

chrome-plated or anodised aluminium

parts. This may damage the protective

coating; also, cleaners and detergents

may discolour or deteriorate the paint.

Pay special attention to removing salt, dirt,
mud, and other foreign material from the
underside of the wings, and make sure the
drain holes in the lower edges of the doors
and rocker panels are clean.
 
Insects, tar, tree sap, bird droppings,
industrial fallout, and similar deposits can
damage the finish if not removed
immediately. When prompt washing with
plain water is ineffective, use a mild soap
made for use on vehicles.
 

Maintenance and Care

Appearance Care

6-63

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Reviews: