Mazda CX-3 Owner'S Manual Download | Manualshive

Page: 655 / 785

background image

Thoroughly rinse off all soap with
lukewarm or cold water. Do not allow
soap to dry on the finish.

After washing the vehicle, dry it with a
clean chamois to prevent water spots from
forming.

WARNING

Dry o

ff

brakes that have become wet by

driving slowly, releasing the accelerator

pedal and lightly applying the brakes

several times until the brake performance

returns to normal:

Driving with wet brakes is dangerous.

Increased stopping distance or the vehicle

pulling to one side when braking could

result in a serious accident. Light braking

will indicate whether the brakes have been

a

ff

ected.

When using an automatic car wash

x

Retract the door mirrors.

x

The automatic car wash brushes could
reduce the paint lustre or hasten paint
deterioration.

When using a high water pressure car
wash

High water temperature and high water
pressure car washers are available
depending on the type of car wash
machine. If the car washer nozzle is put
too close to the vehicle, the force of the
spray could damage or deform the
molding, affect the sealability of parts, and
allow water to penetrate the interior. Keep
a sufficient space (30 cm (12 in) or more)
between the nozzle and the vehicle. In
addition, do not spend too much time
spraying the same area of the vehicle, and
be very careful when spraying between
gaps in doors and around windows.

Waxing

Your vehicle needs to be waxed when
water no longer beads on the finish.
Always wash and dry the vehicle before
waxing it. In addition to the vehicle body,
wax the metal trim to maintain its lustre.

1. Use wax which contains no abrasives.

Waxes containing abrasive will remove
paint and could damage bright metal
parts.

2. Use a good grade of natural wax for

metallic, mica, and solid colours.

3. When waxing, coat evenly with the

sponge supplied or a soft cloth.

4. Wipe off the wax with a soft cloth.

NOTE

A spot remover to remove oil, tar, and
similar materials will usually also take off
the wax. Rewax these areas even if the rest
of the vehicle does not need it.

Maintenance and Care

Appearance Care

6-64

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

«
...
653
654
655
656
657
...
»

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-3

Brand: Acdeos Pages: 7

Brand: PEUGEOT Pages: 128

Brand: Schumacher Electric Pages: 87

2009 ESCALADE ESV

Brand: Cadillac Pages: 602

Brand: Thule Pages: 8

Brand: Chevrolet Pages: 2

Brand: Volvo Pages: 188

adaptiv mini ADVM-BM1

Brand: Connects2 Pages: 4

Brand: FALCON RIDGE Pages: 8

Brand: Scosche Pages: 8

Brand: UAZ Pages: 112

Brand: Daesung Pages: 9

Brand: Pontiac Pages: 318

Brand: Cadillac Pages: 529

Brand: Toro Pages: 16

Brand: Toyota Pages: 779

Brand: Menabo Pages: 8

Brand: DRAGONFIRE Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands