Mazda CX-3 Owner'S Manual Download

Page: 66 / 785

Do not drive with either front seats reclined:

Sitting in a reclined position while the vehicle is moving is dangerous because you do not get

the full protection from seat belts. During sudden braking or a collision, you can slide under

the lap belt and su

er serious internal injuries. For maximum protection, sit well back and

upright.

Do not place an object such as a cushion between the seatback and your back:

Putting an object such as a cushion between the seatback and your back is dangerous

because you will be unable to maintain a safe driving posture and the seat belt cannot

function at its full capacity in a collision, which could result in a serious accident, injury or

death.

Do not place objects under the seat:

The object could get stuck and cause the seat to not be

xed securely, and result in an

accident.

Do not stack cargo higher than the seatbacks:

Stacking luggage or other cargo higher than the seatbacks is dangerous. During sudden

braking or a collision, objects can

y around and become projectiles that may hit and injure

passengers.

Make sure luggage and cargo is secured before driving:

Not securing cargo while driving is dangerous as it could move or be crushed during sudden

braking or a collision and cause injury.

Never allow a passenger to sit or stand on the folded seatback while the vehicle is moving:

Driving with a passenger on the folded seatback is dangerous. Allowing a child to sit up on

the folded seatback while the vehicle is moving is particularly dangerous. In a sudden stop or

even a minor collision, a child not in a proper seat or child-restraint system and seat belt could

be thrown forward, back or even out of the vehicle resulting in serious injuries or death. The

child in the baggage area could be thrown into other occupants and cause serious injury.

CAUTION

When operating a seat, be careful not to put your hands or

ngers near the moving parts of

the seat or on the side trim to prevent injury.

When moving the seats, make sure there is no cargo in the surrounding area. If the cargo

gets caught it could damage the cargo.

Essential Safety Equipment

Seats

2-3

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands