Mazda CX-3 Owner'S Manual Download | Manualshive

Page: 69 / 785

background image

Seat Recline

(Manual Seat)
To change the seatback angle, lean forward slightly while raising the lever. Then lean back
to the desired position and release the lever.
Make sure the lever returns to its original position and the seatback is locked in place by
attempting to push it forward and backward.
(Power Seat)
To change the seatback angle, press the front or rear side of the reclining switch. Release the
switch at the desired position.

Lumbar Support Adjustment (Driver's Power Seat)

To increase the seat firmness, press and hold the front part of the switch to the desired
position, then release it.
Press the rear part of the switch to decrease firmness.

▼

Seat Warmer

*

The front seats are electrically heated. The
ignition must be switched ON.
Press the seat warmer switch while the
ignition is switched ON to operate the seat
warmer. The indicator lights turn on to
indicate that the seat warmer is operating.
The mode changes as follows each time
the seat warmer switch is pressed.

OFF

High

Mid

Low

WARNING

Be careful when using the seat warmer:

The heat from the seat warmer may be too

hot for some people, as indicated as

follows, and could cause a

low-temperature burn.

¾

Infants, small children, elderly people,

and physically challenged people

¾

People with delicate skin

¾

People who are excessively fatigued

¾

People who are intoxicated

¾

People who have taken sleep-inducing

medicine such as sleeping pills or cold

medicine

Do not use the seat warmer with anything

having high moisture-retention ability such

as a blanket or cushion on the seat:

The seat may be heated excessively and

cause a low-temperature burn.

Do not use the seat warmer even when

taking a short nap in the vehicle:

The seat may be heated excessively and

cause a low-temperature burn.

Essential Safety Equipment

Seats

2-6

*Some models.

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

«
...
67
68
69
70
71
...
»

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-3

Brand: Kargo Master Pages: 6

AUDI 4G HIGHEND

Brand: KAP Pages: 20

Brand: Toyota Pages: 35

Brand: Axxess Pages: 8

Transit Vancouver Wagon

Brand: Webasto Pages: 44

FIX&GO automatic

Brand: Alfa Romeo Pages: 40

Brand: AA Products Pages: 6

Brand: Hank Pages: 2

2011 A3 Sportback

Brand: Audi Pages: 29

Brand: TAUBENREUTHER Pages: 18

Brand: Acura Pages: 7

Brand: Roadmaster Pages: 4

Brand: Mitsubishi Pages: 367

CHALLENGER GK-6125A 2018

Brand: Coolster Pages: 45

Brand: Meritor Pages: 20

SB-J-GCHER2/10W3v2

Brand: Stealthbox Pages: 2

Brand: Edelbrock Pages: 4

OVER DRIVE PolyPRO 3 Car Cover

Brand: Classic Accessories Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands