Mazda CX-3 Owner'S Manual Download

Page: 71 / 785

Programming

1. Make sure the parking brake is on.
2.

(Automatic transaxle)

Make sure the selector lever is in the P
position.

3. Start the engine.
4. Adjust the seat and the active driving

display to the desired driving position.

5. Press the SET button on the seat until a

beep sound is heard 1 time.

6. Perform one of the following settings

within 5 seconds of completing step 5
above:

Programming using a button on
the side of the seat

Press the button you want to
programme, either button 1 or 2,
until a beep sound is heard 1 time.

Programming using the key

Press the key button until a beep
sound is heard 1 time.

NOTE

If a beep sound is heard 3 times, the
operation is cancelled.

To move the driving position to a
programmed position

(Using a button on the side of the seat)

1. Make sure the parking brake is on.
2.

(Automatic transaxle)

Make sure the selector lever is in the P
position.

3. Start the engine.
4. Press the programming button for the

driving position you want to call up
(button 1 or 2).

5. A beep sound is heard when the

driving position adjustment is
completed.

NOTE

If the driving position movement is not
changed, only the beep sounds.

A seat position can be called up even
with the engine not running.

The driving position adjustment is
cancelled in the following cases:

Any of the seat adjustment switches is
operated.

The SET button is pressed.

Programming button 1 or 2 is pressed.

The key button or button is
operated.

The vehicle starts moving.

The active driving display is adjusted.

(Using a programmed key)

1. Unlock the doors by pressing a request

switch or the key button.

2. After unlocking the doors, the seat

position adjustment begins within 40
seconds of opening the driver's door,
and a beep sounds when the operation
is finished.

3. Make sure the parking brake is on.
4.

(Automatic transaxle)

Make sure the selector lever is in the P
position.

5. Start the engine.
6. The active driving display adjustment

begins.

NOTE

If there is no driving position movement,
a beep is not heard.

The driving position adjustment is
cancelled in the following cases:

Any of the seat adjustment switches is
operated.

The SET button is pressed.

Essential Safety Equipment

Seats

2-8

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands