Mazda CX-3 Owner'S Manual Download

Page: 721 / 785

Cell Phones Warning

WARNING

Please comply with the legal regulations concerning the use of communication equipment in

vehicles in your country:

Use of any electrical devices such as cell phones, computers, portable radios, vehicle

navigation or other devices by the driver while the vehicle is moving is dangerous. Dialing a

number on a cell phone while driving also ties-up the driver's hands. Use of these devices will

cause the driver to be distracted and could lead to a serious accident. If a passenger is unable

to use the device, pull o

the right-of-way to a safe area before use. If use of a cell phone is

necessary despite this warning, use a hands-free system to at least leave the hands free to

drive the vehicle. Never use a cell phone or other electrical devices while the vehicle is moving

and, instead, concentrate on the full-time job of driving.

Customer Information

Cell Phones

8-4

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands