Mazda CX-3 Owner'S Manual Download

Page: 771 / 785

Item

Feature

Factory Set‐

ting

Available Settings

Settings

Change
Method

Active Driving Display

(page 4-32)

Display

Setting can be changed so that
the Active Driving Display is
not displayed.

On/Off

C ―

The display height (up/down
position) can be changed.

13 steps up/down

from initial setting

(total: 27 steps)

C ―

The method for adjusting the
display brightness (automatical‐
ly/manually) can be changed.

Auto

Auto/Man.

C ―

The standard brightness while
automatic adjustment is select‐
ed can be changed using the
brightness adjustment.

2 steps up/down from
initial setting (total: 5

steps)

C ―

The standard brightness while
manual adjustment is selected
can be changed using the
brightness adjustment.

20 steps up/down

from initial setting

(total: 41 steps)

C ―

Navigation guidance

Display/non-display.

On/Off

C ―

1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda

recommends that these systems remain On.

2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be

changed. The warning sound is only a beep.

3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The

volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.

4 This system functions only when the navigation system is functioning.

5 When the ultrasonic sensors detect an obstruction, the contents indicated on the centre display switches to the

360°View Monitor. (Vehicles with 360°View Monitor)

6 If the auto-wiper control is set to Off, the wiper lever

position is set to intermittent operation.

7 Except countries prohibited by law.

8 The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of

the rear window defogger has been changed to Continuous.

9 Available only in display from the centre display.

Specifications

Personalisation Features

9-18

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands