Mazda CX-3 Owner'S Manual Download

Page: 175 / 785

Distance [Unit: mm (in)]

MAX 9 (0.35)

Side view

Cross section view

Tyre

Installing the chains

1. If your vehicle is equipped with wheel

covers remove them, otherwise the
chain bands will scratch them.

2. Secure the chains on the front tyres as

tightly as possible. Always follow the
chain manufacturer's instructions.

3. Retighten the chains after driving

1/2―1 km (1/4―1/2 mile).

Driving In Flooded Area

WARNING

Dry o

brakes that have become wet by

driving slowly, releasing the accelerator

pedal and lightly applying the brakes

several times until the brake performance

returns to normal:

Driving with wet brakes is dangerous.

Increased stopping distance or the vehicle

pulling to one side when braking could

result in a serious accident. Light braking

will indicate whether the brakes have been

ected.

CAUTION

Do not drive the vehicle on

ooded roads

as it could cause short circuiting of

electrical/electronic parts, or engine

damage or stalling from water absorption.

If the vehicle has been immersed in water,

consult an expert repairer (we recommend

an Authorised Mazda Repairer).

Before Driving

Driving Tips

3-54

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands