Mazda CX-3 Owner'S Manual Download | Manualshive

Page: 318 / 785

background image

Distance Recognition Support System (DRSS)

*

The DRSS measures the distance between your vehicle and a vehicle ahead using a radar
sensor (front) while the vehicle speed is about 30 km/h (19 mph) or faster, and if your
vehicle approaches a vehicle ahead more closely than what is appropriate for maintaining
distance between the vehicles according to the vehicle speed, a notification in the active
driving display is indicated to advise you to keep a safe distance from the vehicle ahead.

WARNING

Do not rely completely on the DRSS and always drive carefully:

The ability to detect a vehicle ahead is limited depending on the type of vehicle ahead, the

weather conditions, and the tra

ffi

c conditions. Therefore, if the accelerator and brake pedals

are not operated correctly it could lead to an accident. Always verify the safety of the

surrounding area and depress the brake pedal or accelerator pedal while keeping a safer

distance from vehicles ahead or on-coming vehicles.

NOTE

x

The DRSS operates when all of the following conditions are met:

x

The ignition is switched ON.

x

The DRSS is on.

x

The selector lever is in a position other than reverse (R).

x

The vehicle speed is 30 km/h or faster (19 mph or faster).

x

The objects which activate the system are 4-wheeled vehicles.

x

The DRSS may also operate in the presence of motorcycles and bicycles.

x

The DRSS may not operate normally under the following conditions:

x

The Dynamic Stability Control (DSC) has a malfunction.

x

The vehicle ahead is travelling at an extremely slow speed.

x

The system does not operate with the following objects:

x

Vehicles approaching in the opposite direction.

x

Stationary objects (stopped vehicles, obstructions)

When Driving

i-ACTIVSENSE

*Some models.

4-133

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

«
...
316
317
318
319
320
...
»

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-3

Brand: iDataLink Pages: 9

Brand: Camcar Pages: 2

Brand: ideus Pages: 159

Brand: Sears Pages: 41

Brand: Fast Master Products Pages: 13

Brand: Whispbar Pages: 15

Brand: Hyundai Pages: 19

Brand: BMW Pages: 189

Brand: UAZ Pages: 112

Brand: MULTILIFT Pages: 62

Brand: Classic AutoAir Pages: 44

Brand: Volvo Pages: 18

spectroFlex Car Adapter

Brand: wtw Pages: 4

OVER DRIVE PolyPRO 3 Car Cover

Brand: Classic Accessories Pages: 2

Brand: Whelen Engineering Company Pages: 4

Brand: Kleinn Air Horns Pages: 33

Brand: Volvo Pages: 286

Brand: Mid America Motorworks Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands