Mazda CX-3 Owner'S Manual Download | Manualshive

Page: 369 / 785

background image

Smart Brake Support

(SBS)

*

The SBS system alerts the driver of a
possible collision using a display and
warning sound if the radar sensor (front)
and the Forward Sensing Camera (FSC)
determine that there is the possibility of a
collision with a vehicle ahead while the
vehicle is being driven at about 15 km/h or
faster (10 mph or faster). Furthermore, if
the radar sensor (front) and the Forward
Sensing Camera (FSC) determines that a
collision is unavoidable, the automatic
brake control is performed to reduce
damage in the event of a collision.
In addition, when the driver depresses the
brake pedal, the brakes are applied firmly
and quickly to assist. (Brake Assist (SBS
brake assist))

WARNING

Do not rely completely on the SBS system

and always drive carefully:

The SBS is designed to reduce damage in

the event of a collision, not avoid an

accident. The ability to detect an

obstruction is limited depending on the

obstruction, weather conditions, or tra

ffi

c

conditions. Therefore, if the accelerator

pedal or brake pedal is mistakenly

operated it could result in an accident.

Always verify the safety of the surrounding

area and depress the brake pedal or

accelerator pedal while keeping a safer

distance from vehicles ahead or on-coming

vehicles.

CAUTION

In the following cases, turn the system o

ff

to prevent a mis-operation:

¾

The vehicle is being towed or when

towing another vehicle.

¾

The vehicle is on a chassis roller.

¾

When driving on rough roads such as in

areas of dense grass or o

ff

-road.

NOTE

x

The SBS system operates when all of the
following conditions are met:

x

The ignition is switched ON.

x

The SBS system is on.

x

The vehicle speed is about 15 km/h or
faster (10 mph or faster).

x

The relative speed between your
vehicle and the vehicle ahead is about
15 km/h or faster (10 mph or faster).

x

The Dynamic Stability Control (DSC)
is not operating.

x

The SBS system may not operate under
the following conditions:

x

If the vehicle is accelerated rapidly
and it comes close to a vehicle ahead.

x

The vehicle is driven at the same
speed as the vehicle ahead.

x

The accelerator pedal is depressed.

x

The brake pedal is depressed.

x

The steering wheel is being operated.

x

The selector lever is being operated.

x

The direction indicator is being used.

x

When the vehicle ahead is not
equipped with tail lights or the tail
lights are turned off.

When Driving

i-ACTIVSENSE

4-184

*Some models.

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

«
...
367
368
369
370
371
...
»

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-3

Brand: AC Schnitzer Pages: 16

Brand: Jeep Pages: 212

Brand: RaceChip Pages: 20

Multiple G9F18 AU000

Brand: Genesis Pages: 3

Brand: Metra Electronics Pages: 2

Autostacker PL-6SR

Brand: BendPak Pages: 104

Brand: Honda Pages: 20

2009 Rio Series

Brand: Kia Pages: 219

Brand: Whelen Engineering Company Pages: 9

Brand: Whispbar Pages: 15

Brand: Fiat Pages: 284

PRIME DESIGN HRR3-E-PM42

Brand: Safe Fleet Pages: 12

Brand: N.R. AUTOSEATS Pages: 8

Brand: Prorack Pages: 14

Brand: Conrad Pages: 8

Brand: Gator Pages: 5

FreshSesh PowderHound

Brand: Yakima Pages: 18

Brand: Toyota Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands