Mazda CX-3 Owner'S Manual Download | Manualshive

Page: 406 / 785

background image

Radar Sensors (Rear)

*

Your vehicle is equipped with radar sensors (rear). The following systems also use the radar
sensors (rear).

x

Blind Spot Monitoring (BSM)

x

Rear Cross Traffic Alert (RCTA)

The radar sensors (rear) function by detecting the radio waves reflected off a vehicle
approaching from the rear or an obstruction sent from the radar sensor.

Radar sensors (rear)

The radar sensors (rear) are installed inside the rear bumper, one each on the left and right
sides.
Always keep the surface of the rear bumper near the radar sensors (rear) clean so that the
radar sensors (rear) operate normally. Also, do not apply items such as stickers.
Refer to Exterior Care on page 6-61.

CAUTION

If the rear bumper receives a severe impact, the system may no longer operate normally. Stop

the system immediately and have the vehicle inspected at an expert repairer (we recommend

an Authorised Mazda Repairer).

NOTE

x

The detection ability of the radar sensors (rear) has limitations. In the following cases,
the detection ability may lower and the system may not operate normally.

x

The rear bumper near the radar sensors (rear) has become deformed.

x

Snow, ice or mud adheres to the radar sensors (rear) on the rear bumper.

x

Under bad weather conditions such as rain, snow and fog.

x

Under the following conditions, the radar sensors (rear) cannot detect target objects or it
may be difficult to detect them.

When Driving

i-ACTIVSENSE

*Some models.

4-221

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

«
...
404
405
406
407
408
...
»

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-3

Brand: Hama Pages: 2

Brand: Abarth Pages: 36

Brand: Acdeos Pages: 7

Brand: iDataLink Pages: 9

Brand: GARO Pages: 23

LS4 Wallmounted

Brand: GARO Pages: 15

Brand: RAM Pages: 292

Brand: RAM Pages: 116

Brand: Yakima Pages: 6

Brand: Yakima Pages: 18

Brand: Aries Pages: 3

Brand: B-Speech Pages: 24

Brand: BMW Pages: 21

2005 P207 Explorer Sport Trac

Brand: Ford Pages: 540

Truck Diesel Supplement 2012

Brand: RAM Pages: 174

Brand: travall Pages: 2

Brand: Gacell Pages: 12

Brand: rockymounts Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands