Mazda CX-3 Owner'S Manual Download

Page: 464 / 785

Operating the Compact Disc (CD) Player

CD eject button

CD slot

Media/Scan button

Folder down button

Folder up button

Play/Pause button

Random button

Repeat button

Audio display

Text button

Track down/

Reverse button
Track up/

Fast-forward button

Type

Playable data

Music/MP3/WMA/
AAC CD player

Music data (CD-DA)

MP3/WMA/AAC file

NOTE

If a disc has both music data (CD-DA) and
MP3/WMA/AAC files, playback of the 2 or
3 file types differs depending on how the
disc was recorded.

Inserting the CD

Insert the CD into the slot, label-side up.
The auto-loading mechanism will set the
CD and begin play.

NOTE

There will be a short lapse before play
begins while the player reads the digital
signals on the CD.

Ejecting the CD

Press the CD eject button ( ) to eject the
CD.

▼

Playback

Press the media button (

) to switch

to CD mode and start playback.

NOTE

The CD mode cannot be selected if a CD
has not been inserted.

Pause

To stop playback, press the Play/Pause
button (4).
Press the button again to resume playback.

Interior Features

Audio Set [Type A (non-touchscreen)]

*Some models.

5-29

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands