Mazda CX-3 Owner'S Manual Download

Page: 477 / 785

Bluetooth

Preparation

NOTE

The language used for the words
“password” and “pin code” appearing in
the Bluetooth

Preparation, differs

depending on the market.

password
Except Thailand: password
Thailand: passcode

pin code
Except Thailand: pin code
Thailand: pairing code

▼

Bluetooth

Hands-Free Preparation

Pairing code setting

The 4-digit pairing code setting for
registration of your cell phone (pairing)
can be set beforehand.

NOTE

The initial setting value is “0000”.

1. Press the pick-up button or talk button

with a short press.

Say:

[Beep] “Setup”

Prompt:

“Select one of the following:

Pairing options, confirmation prompts,
language, password, select phone or
select music player.”

Say:

[Beep] “Pairing options”

Prompt:

“Select one of the following:

Pair, Edit, Delete, List, or Set pin
Code.”

Say:

[Beep] “Set pin code”

Prompt:

“Your current pin code is

XXXX. Do you want to change it to a
different pairing pin code?”

Say:

[Beep] “Yes”

Prompt:

“Please say a 4-digit pairing

code.”

10.

Say:

[Beep] “YYYY”

11.

Prompt:

“YYYY is this correct?”

12.

Say:

[Beep] “Yes” or “No”

13. If “Yes”, go to Step 14. If “No”, the

procedure returns to Step 9.

14.

Prompt:

“Your new pairing pin code is

YYYY. Use this pin code when pairing
devices to the Hands free system. Do
you want to pair a device now?”

15.

Say:

[Beep] “Yes” or “No”

16. If “Yes”, the system switches to the

device registration mode. If “No”, the
system returns to standby status.

Interior Features

Audio Set [Type A (non-touchscreen)]

5-42

*Some models.

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands