Mazda CX-3 Owner'S Manual Download

Page: 560 / 785

Settings

NOTE

Depending on the grade and specification, the screen display may differ.

Select the

icon on the home screen and display the Settings screen.

Switch the tab and select the setting item you want to change.
You can customize settings in the setup display as follows:

Tab

Item

Function

AD-Disp

Height
Brightness Control
Other

Refer to Active Driving Display on page 4-32.

Display

Refer to Volume/Display/Sound Controls on page 5-78.

Safety

Distance Recognition Support System
SBS/SCBS
Other

Refer to Personalisation Features on page
9-13.

Sound

Refer to Volume/Display/Sound Controls on page 5-78.

Clock

Adjust Time

Displays the currently set time is displayed.
Press to advance the hour/minute, and select

to move the hour/minute back.

AM/PM can only be selected with the 12-hour
clock display.

GPS Sync

Synchronizes with GPS when turned on.
When turned off, the time can be changed
from “Adjust Time”.

Time Format

Changes the display between 12 and 24-hour
clock time.

Time Zone Select

When it's not synchronized with GPS, select
the region you want to specify.

Daylight Savings Time

Turns the daylight saving time setting on/off.
When ON, the time advances 1 hour. When
OFF, it returns to normal time.

Vehicle

Rain Sensing Wiper
Door Locks
Other

Refer to Personalisation Features on page
9-13.

Devices

Bluetooth

Refer to Bluetooth

Preparation on page

5-101.

Network Management

Wi-Fi™ is used to obtain Navi POI/Real Time
Traffic function (Such as gas prices, weather,
nearest restaurant)

Interior Features

Audio Set [Type B (touchscreen)]

5-125

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands