Mazda CX-3 Owner'S Manual Download

Page: 586 / 785

Bottle Holder

Bottle holders are on the inside of the
doors.

Front

Bottle holder

Rear

Bottle holder

CAUTION

Do not use the bottle holders for containers

without caps. The contents may spill when

opening/closing the door or while driving

the vehicle.

Storage Compartments

WARNING

Keep storage boxes closed when driving:

Driving with the storage boxes open is

dangerous. To reduce the possibility of

injury in an accident or a sudden stop, keep

the storage boxes closed when driving.

When loading cargo, make sure that it is

completely secured:

If the cargo is not completely secured, it

may move or collapse while driving or

during sudden braking, resulting in injury

or an accident.

Do not put articles in storage spaces with

no lid:

Putting articles in storage spaces with no

lid is dangerous as they could be thrown

around the cabin if the vehicle is suddenly

accelerated and cause injury depending on

how the article is stored.

CAUTION

Do not leave lighters or eyeglasses in the

storage boxes while parked under the sun.

A lighter could explode or the plastic

material in eyeglasses could deform and

crack from high temperature.

Interior Features

Interior Equipment

5-151

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands