Mazda CX-3 Owner'S Manual Download

Page: 587 / 785

▼

Overhead Console

This console box is designed to store
eyeglasses or other accessories.
Push and release to open.

▼

Glove Compartment

To open the glove compartment, pull the
latch toward you.

To close the glove compartment, firmly
press in the centre of the glove
compartment lid.

▼

Centre Console

The rear divider can be removed and
stored.
Removing the divider provides a console
box with a wider space.
1. Pull out the divider.

Divider

(rear)

2. Insert the divider into the armrest from

the top with the flap side of the divider
facing the underside of the armrest,
and press it in until a click sound is
heard.

NOTE

To use the divider, install it in the
reverse order of removal.

Flap side

Interior Features

Interior Equipment

5-152

*Some models.

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands