Mazda CX-3 Owner'S Manual Download

Page: 612 / 785

Bonnet

WARNING

Always check that the bonnet is closed and

securely locked:

A bonnet that is not closed and securely

locked is dangerous as it could

y open

while the vehicle is moving and block the

driver's vision which could result in a

serious accident.

▼

Opening the Bonnet

1. With the vehicle parked, pull the

release handle to unlock the bonnet.

Release handle

2. Insert your hand into the bonnet

opening, slide the latch lever to the
right, and lift up the bonnet.

Lever

NOTE

The lever is located a little to the left of
centre when facing the vehicle.

3. Grasp the support rod in the padded

area and secure it in the support rod
hole indicated by the arrow to hold the
bonnet open.

Clip

Maintenance and Care

Owner Maintenance

6-21

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands