Mazda CX-3 Owner'S Manual Download | Manualshive

Page: 690 / 785

background image

Towing Description

We recommend that towing be done only
by an expert repairer (we recommend an
Authorised Mazda Repairer) or a
commercial tow-truck service.

Proper lifting and towing are necessary to
prevent damage to the vehicle. Particularly
when towing a 4WD vehicle, where all the
wheels are connected to the drive train,
proper transporting of the vehicle is
absolutely essential to avoid damaging the
drive system. Government and local laws
must be followed.

Wheel dollies

A towed 2WD vehicle should have its
drive wheels (front wheels) off the ground.
If excessive damage or other conditions
prevent this, use wheel dollies.

When towing a 2WD vehicle with the rear
wheels on the ground, release the parking
brake.
Refer to Electric Parking Brake (EPB) on
page 4-78.

A towed 4WD vehicle must have all its
wheels off the ground.

WARNING

Always tow a 4WD vehicle with all four

wheels o

ff

the ground:

Towing a 4WD vehicle with either the front

or rear wheels on the ground is dangerous

as the drive train could be damaged, or the

vehicle could trail away from the tow truck

and cause an accident. If the drive train has

been damaged, transport the vehicle on a

fl

atbed truck.

CAUTION

¾

Do not tow the vehicle pointed backward

with driving wheels on the ground. This

may cause internal damage to the

transaxle.

If Trouble Arises

Emergency Towing

7-29

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

«
...
688
689
690
691
692
...
»

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-3

Brand: Jeep Pages: 6

Brand: Curt Manufacturing Pages: 6

Brand: Saab Pages: 288

Brand: Sunsky Pages: 9

Brand: Velleman Pages: 12

Brand: Mercedes-Benz Pages: 91

Brand: Subaru Pages: 19

Brand: Grillo Pages: 71

Brand: Bulldog Security Pages: 7

Brand: Porsche Pages: 145

Brand: QA1 Pages: 4

Brand: iDataLink Pages: 11

Chevrolet CAMARO 1969

Brand: GMC Pages: 92

Brand: Buick Pages: 20

Brand: Kia Pages: 17

BLADE-AL-TL5-EN

Brand: Automotive Data Solutions Pages: 27

F-150 Hybrid 2021

Brand: Ford Pages: 32

Brand: SSANGYONG Pages: 81

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands