Mazda CX-3 Owner'S Manual Download

Page: 692 / 785

Towing/Tiedown Hooks

CAUTION

The towing eyelet should be used in an

emergency (to get the vehicle out of a

ditch or a snow bank, for example).

When using the towing eyelets, always

pull the lead or chain in a straight

direction with respect to the eyelet. Never

apply a sideways force.

NOTE

When towing with chain or lead, wrap the
chain or lead with a soft cloth near the
bumper to prevent damage to the bumper.

▼

Towing Hook-Front

1. Remove the towing eyelet and the

wheel brace from the luggage
compartment (page 7-3).

2. Wrap a jack lever or similar tool with a

soft cloth to prevent damage to a
painted bumper, and open the cap
located on the front bumper.

CAUTION

Do not use excessive force as it may

damage the cap or scratch the painted

bumper surface.

NOTE

Remove the cap completely and store it
so as not to lose it.

3. Securely install the towing eyelet using

the wheel brace.

Wheel brace

Towin

eyelet

4. Hook the towing rope to the towing

eyelet.

CAUTION

If the towing eyelet is not securely

tightened, it may loosen or disengage

from the bumper when towing the

vehicle. Make sure that the towing

eyelet is securely tightened to the

bumper.

After using the towing eyelets store them
as follows.

Towing eyelet (Short type)

Store it in the tool bag.

If Trouble Arises

Emergency Towing

7-31

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands