Mazda CX-3 Owner'S Manual Download | Manualshive

Page: 78 / 785

background image

Seat Belt Precautions

Seat belts help to decrease the possibility of severe injury during accidents and sudden
stops. Mazda recommends that the driver and all passengers always wear seat belts.
All the seats have lap/shoulder belts. These belts also have retractors with inertia locks that
keep them out of the way when not in use. The locks allow the belts to remain comfortable
on users, but they will lock in position during a collision.

WARNING

Always wear your seat belt and make sure all occupants are properly restrained:

Not wearing a seat belt is extremely dangerous. During a collision, occupants not wearing

seat belts could hit someone or things inside the vehicle or even be thrown out of the vehicle.

They could be seriously injured or even killed. In the same collision, occupants wearing seat

belts would be much safer.

Do not wear twisted seat belts:

Twisted seat belts are dangerous. In a collision, the full width of the belt is not available to

absorb the impact. This puts more force on the bones beneath the belt, which could cause

serious injury or death. So, if your seat belt is twisted, you must straighten the seat belt to

remove any twists and to allow the full width of the belt to be used.

Never use one seat belt on more than one person at a time:

Using one seat belt for more than one person at a time is dangerous. A seat belt used in this

way cannot spread the impact forces properly and the two passengers could be crushed

together and seriously injured or even killed. Never use one belt for more than one person at a

time and always operate the vehicle with each occupant properly restrained.

Never use one seat belt on more than one person at a time.

Do not operate a vehicle with a damaged seat belt:

Using a damaged seat belt is dangerous. An accident could damage the belt webbing of the

seat belt in use. A damaged seat belt cannot provide adequate protection in a collision. Have

an expert repairer (we recommend an Authorised Mazda Repairer) inspect all seat belt

systems in use during an accident before they are used again.

Essential Safety Equipment

Seat Belt Systems

2-15

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

«
...
76
77
78
79
80
...
»

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-3

AAB-P-RZR900-K2-001

Brand: SuperATV Pages: 3

WirelessAIR 73000EZ

Brand: Air Lift Pages: 12

Brand: Kargo Master Pages: 6

10-8002-C11670C

Brand: Saleen Pages: 17

2005 JR41 Stratus

Brand: Dodge Pages: 293

Brand: Sagem Pages: 10

Brand: Xpresskit Pages: 18

Brand: Thule Pages: 3

Bluetooth Kit3 PLUS

Brand: N-Com Pages: 36

Brand: Buick Pages: 161

Brand: Aries Pages: 3

transit connect 2012

Brand: Ford Pages: 299

Brand: Oldsmobile Pages: 340

Brand: SkyRack Pages: 2

Brand: Hyundai Pages: 380

Brand: Dacia Pages: 244

Brand: TRAMEC Pages: 116

Brand: Whelen Engineering Company Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands