Mazda CX-3 Owner'S Manual Download | Manualshive

Page: 84 / 785

background image

Child-Restraint Precautions

Mazda strongly urges the use of child-restraint systems for children small enough to use
them.
Mazda recommends use of a Mazda genuine child-restraint system or one that complies
with the UN-R

*1

44 or UN-R 129 regulation. If you would like to purchase a Mazda

genuine child-restraint system, please contact an Authorised Mazda Repairer.
Check your local and state or provincial laws for specific requirements regarding the safety
of children riding in your vehicle.

*

1 UN-R stands for United Nations Regulation.

Whatever child-restraint system you consider, please pick the appropriate one for the age
and size of the child, obey the law and follow the instructions that come with the individual
child-restraint system.

A child who has outgrown child-restraint systems should sit in the rear and use seat belts.

The child-restraint system should be installed on the rear seat.
Statistics confirm that the rear seat is the best place for all children up to 12 years of age-the
more so with a supplementary restraint system (air bags).

A rear-facing child-restraint system should

NEVER

be used in the front passenger seat with

the air bag system activated. The front passenger's seat is also the least preferred seat for
other child-restraint systems.

For some models, we have provided a deactivation switch that will disable front passenger
air bag inflation. Do not switch off the front passenger air bag without reading the “Front
Passenger Air Bag Deactivation Switch” (page 2-46).

WARNING

Use the correct size child-restraint system:

For e

ff

ective protection in vehicle accidents and sudden stops, a child must be properly

restrained using a seat belt or child-restraint system depending on age and size. If not, the

child could be seriously injured or even killed in an accident.

Essential Safety Equipment

Child Restraint

2-21

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

«
...
82
83
84
85
86
...
»

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-3

Brand: TATA Motors Pages: 94

Brand: GÄN Pages: 24

Brand: Raven Pages: 24

Brand: Weather Guard Pages: 4

Brand: Jabra Pages: 10

Brand: PullRite Pages: 10

Brand: Curt Manufacturing Pages: 6

Car Cup Holder Phone Mount

Brand: UGREEN Pages: 9

Code Alarm PROFESSIONAL SERIES CA 5550SST

Brand: Audiovox Pages: 14

Brand: Globalsat Pages: 2

Brand: Whispbar Pages: 15

PRIME DESIGN VRR-E-PM21

Brand: Safe Fleet Pages: 12

Brand: Mercedes-Benz Pages: 358

LED Dominator TAM83S2

Brand: Whelen Engineering Company Pages: 2

Brand: Toyota Pages: 497

Brand: J. Strong Pages: 2

Brand: Menabo Pages: 12

Brand: TEINHOF Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands