MAZE Moisture Sensing Irrigation Kit, Instructions Manual

5

4

Mo

ist

ur

e Se

nsi

ng

Irr

iga

tio

n K

it

WATER CONNECTION

WATER CONNECTION

When connecting to a Maze MINItank with a 

threaded tap use the female threaded connect-

er in conjunction with the tap connector (nut is 

not required).

Alternatively if using another container or buck-

et, the tank connecter can be connected by 

making a 12mm hole in the tank. 

The tank/container must be at least 0.5 m high-

er than the Watering Sensors for every 5m of 

tube but no more than 14 meters higher. 

1

2

3/4“

max.

6 bar

Borehole 

12 mm

[¹⁄₂”]

Pressure reducer

Tank connector

If connecting to mains pressure use a pressure 

reducer that regulates the pressure to around 1 

bar. 

With one water connection you can operate a 

system of up to 60 meters (250 Watering Sen-

sors) assuming you have enough pressure. If you 

fit the tee provided with the product immedi-

ately downstream of the pressure reducer, you 

can operate systems of up to 2 x 60 m (500 

Watering Sensors). Heat the feeding tube before 

installation (in hot water or sunshine) so that it 

is easier to fit. Do not kink the tube!