Assembly for Patio Heater
IMPORTANT SAFETY INFORMATION
Before assembling or operating this patio heater unit, please take time to carefully
read this manual. Failure to do so may result in a fire, explosion, loss of life.
UNIT FOR OUTDOOR USE ONLY
- Unpack the halogen heater making sure
that all the items are present and that there are no
components left in the box ensuring that the heater
head is free from any packing material.
- Using the detailed drawing follow the steps
to assemble your halogen heater.
- Do not connect the halogen heater to the
electrical supply until the assembly is complete.
- Do not connect the halogen heater to the
electrical supply if any of the components or the
power cord is damaged in any way.
- Only use the halogen heater on a firm solid
flat area where all the feet on the base are in
contact with the floor. (Should the heater be tilted
or fall over, the auto cut off switch will activate)
- Site the heater outside or in a large open
area and well away from any obstructions such as
branches or where the heater is near any objects
that can be affected by heat, such as furniture,
curtains, or other flammable objects (minimum
distance 1 metre). Otherwise, there will be a
danger of catching fire.
- Do not use near bathtubs, wash areas
or swimming pools.
- Do not use in unventilated areas.
- Do not use where gas, petrol, paint or other
inflammable goods are stored.
- Do not push any items through, obstruct or cover
the grill of the heater head.
- Do not position immediately above or below an
electrical socket.
- Do not move when connected to an electrical
supply and always wait for the patio heater to cool
down before storing away.
- Do not touch the heater head when in use.
- Do not leave turned on and unattended especially
when children and or animals are in the vicinity.
- The indication of the different positions of
switches shall be visible from 1M.
- The Marking concerning covering shall be visible
after the heater has been installed. It shall not be
placed on the back of portable heaters.
- The unit must be placed with the clearance of
100cm to the wall.
- The unit must be correctly installed according to
the instructions.
- The unit must be securely placed on a horizontal
and flat surface.
- The unit is at high temperature during operation.
It keeps hot for a period after shutting down.
Potential danger would occur when touching it
during this period.
- Don’t cover the unit with anything during operation
or for a short time after it’s shut down.
- Don’t wrap the power supply cord around the unit.
- The unit must be handled with care and avoid
vibration nearby or hitting.
- The unit must be securely grounded during
operation.
- If the unit gets damaged, it must be repaired by
professional electricians.
