Assembly Instructions for Patio Heaters
IMPORTANT-RETAIN FOR FUTURE REFERENCE
PATIO HEATERS - AURORA HANGING
Operation:
WARNING: The heater must be properly installed before it is used .
This unit is equipped with one heat setting On I Off.
-
Plug the Patio Heater into a grounded 220-240V 50-60Hz power outlet.
-
Only operate the heater when it is in the upright position.
-
Our Electric Patio Heater is equipped with Three heat settings.
Remote control operation:
A.
Press on the On/Off switch to activate the heater.
B.
To operate the heater on 900W, press the button "LOW" on the remote control.
C.
To operate the heater on 1200W, press the button "HIGH" on the remote control.
D.
To operate the heater on 2100W, press both the "LOW" and "HIGH" buttons on the remote control.
Touch switch operation:
A.
Press on the On/Off switch to activate the heater
B.
Touch the switch once to operate the heater on 900W power.
C.
Touch the switch twice to operate the heater on 1200W power.
D.
Touch the switch three times to operate the heater on 2100W power.
E.
Touch the switch four times to off the heater.
Technical Specificiation:
•
Model: ZHQ2070-C-N
•
Power supply 220-240V 50-60Hz
•
Wattage max 2100W
•
Net weight 3.6 kg
•
Insulation class I
Minimum Required Distances:
•
25cm from the side wall
•
50cm from the ceiling
•
Installation height above 180cm
