Video Intercom Vandal-Resistant Door Station
·
User Manual
13
5.2
Activation via Batch Configuration Tool
Steps:
1.
Run the Batch Configuration Tool.
Figure 5-2
Select Inactive Device
2.
Select an inactivated device and click
Activate
.
Figure 5-3
Activation Interface (Batch Configuration Tool)
3.
Create a password, and confirm the password.
STRONG PASSWORD RECOMMENDED
–
We highly recommend you create a
strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper
case letters, lower case letters, numbers, and special characters.) in
order to increase the security of your product. And we recommend
you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
4.
Click
OK
to activate the device.
Note:
When the device is not activated, the basic operation and remote operation of device
cannot be performed.
You can hold the
Ctrl
or
Shift
key to select multiple devices in the online devices, and
click
Activate
to activate devices in batch.
