Video Intercom Vandal-Resistant Door Station
·
User Manual
16
6
Local Operation
Before you start:
Make sure the door station has been activated.
Make sure the network cable is well-connected.
Purpose:
You can call the resident (the indoor station) or the center (the master station) via the
door station by pressing or holding the call button.
Default settings of the call button: when you press the call button, it calls the resident,
and when you hold the call button, it calls the center.
Steps:
1.
Press the call button to call the resident.
2.
The resident can accept/decline the calling from the door station, and unlock the
door via the indoor station.
Call Button
Figure 6-1
Call Button of Door Station
Notes:
Besides the indoor station, you can also unlock the door by the master station, the
client software, and the web.
When the video intercom between you and the resident is realized, you can speak to
the resident, and the live view of door station will be displayed on the connected
indoor station.
When live view of door station is displayed on other devices or door station is calling
resident, the door station will detect the brightness of video. When the brightness is
lower than the expected threshold, the supplement light will be enabled.
When the supplement light is enabled, the backlight of key will be auto-enabled,
otherwise, the door station will detect the brightness of live view and enable the
backlight of key when the brightness of live view is lower than expected threshold.
