Video Intercom Vandal-Resistant Door Station
·
User Manual
28
Note:
Only password can be changed.
7.3.3
Configuring Video Intercom Parameters
Door Station No.
Purpose:
To call the door station via the client software or to call indoor stations/the client
software/the master station via the door station successfully, you should number the
door station first. You should set the community No., the building No., the unit No., and
the floor No. for the door station.
The door station supports 2 device types: villa door station and doorphone. When it
works as a doorphone, there is no need setting the community No., the building No., the
unit No., the floor No. or the device No..
Steps:
1.
Enter the device No. settings interface:
Configuration > Video Intercom > Device No.
Settings.
Figure 7-13
Set the Device No.
2.
Select the device type from the drop-down list: Villa Door Station or Doorphone.
3.
Set the the community No., the building No., the unit No., and the floor No..
Note:
When you set 1, 2, 3, and 4 to the community No., the building No., the unit No.,
and the floor No. respectively, the No. of the door station can be written as
1-2-3-4.
When you set the device type as doorphone, there is no need setting the
community No., the building No., the unit No., or the floor No..
4.
Set the device No..
Note:
The device No. requires configuring when the device type of the door station is
Villa Door Station
.
