Video Intercom Vandal-Resistant Door Station
·
User Manual
34
Figure 7-20
Set the Linked Network
2.
Set the SIP server address, the center IP address, and the center port.
3.
Click
Save
to save the settings.
Port Settings
Purpose:
You can set the port No. of the door station, e.g. HTTP port, HTTPS port, and server port.
Steps:
1.
Enter the port settings interface:
Configuration > Network > Basic Settings > Port.
Figure 7-21
Set the Port
2.
Set the HTTP port, HTTPS port, and server port of the door station.
HTTP Port:
The default HTTP port No. is 80, and it can be changed to any port No.
which is not occupied. The unoccupied HTTP port ranging from 1 to 65535 is
available.
HTTPS Port:
The default HTTPS port No. is 443, and it can be changed to any port
No. which is not occupied. The unoccupied HTTP port ranging from 1 to 65535 is
available.
Server Port:
The default server port No. is 8000, and it can be changed to any port
which is not occupied. The unoccupied server port ranging from 2000 to 65535 is
available.
3.
Click
Save
to save the settings.
Note:
