Video Intercom Vandal-Resistant Door Station
·
User Manual
37
3.
Configure the following settings:
Sender:
The name of the email sender.
Sender’s Address:
The email address of the sender.
SMTP Server:
IP address or host name (e.g., smtp.263xmail.com) of the SMTP
Server.
SMTP Port:
The SMTP port. The default TCP/IP port for SMTP is 25 (not secured).
E-mail Encryption:
None and SSL are selectable. Select SSL if it is required by the
SMTP server.
Authentication (optional):
If your email server requires authentication, check this
checkbox to use authentication to log in to this server and input the login user
name and password.
For your privacy and to better protect your system against security
risks, we strongly recommend the use of strong passwords for all
functions and network devices. The password should be something
of your own choosing (using a minimum of 8 characters, including
at least three of the following categories: upper case letters, lower case letters,
numbers and special characters) in order to increase the security of your
product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
The Receiver table:
Select the receiver to which the email is sent. Up to 3
receivers can be configured.
Receiver:
The name of the user to be notified.
Receiver’s Address:
The email address of user to be notified.
4.
Click
Save
to save the settings.
HTTPS Settings
Purpose:
HTTPS provides authentication of the web site and associated web server that one is
communicating with, which protects against Man-in-the-middle attacks. Perform the
following steps to set the port number of https.
E.g., if you set the port number as 443 and the IP address is 192.168.1.64, you may
access the device by inputting https://192.168.1.64:443 via the web browser.
Steps:
1.
Enter the HTTPS settings interface:
Configuration > Network > Advanced Settings >
HTTPS.
The certificate information is presented on the HTTPS settings interface.
