Video Intercom Vandal-Resistant Door Station
·
User Manual
40
You can set the image quality of the door station, including brightness, contrast,
saturation, sharpness, etc.
Steps:
1.
Enter the display settings interface:
Configuration > Image> Display Settings
Figure 7-27
Display Settings
2.
Set the image parameters of the door station.
Image Adjustment
Brightness
describes bright of the image, which ranges from 1 to 100, and the
default value is 50.
Contrast
describes the contrast of the image, which ranges from 1 to 100, and the
default value is 50.
Saturation
describes the colorfulness of the image color, which ranges from 1 to
100, and the default value is 50.
Hue
describes the quality of the image color, which ranges from 1 to 100, and the
default value is 50.
Sharpness
describes the edge contrast of the image, which ranges from 1 to 100,
and the default value is 50.
Video Adjustment
Video Standard:
50 Hz and 60 Hz are selectable. Choose according to the different
video standards. Normally, 50 Hz is for PAL standard and 60 Hz for NTSC standard.
OSD Settings
Purpose:
OSD (On-screen Display) refers to the camera name, time/date format, and display
mode on the live view.
Steps:
