Video Intercom Vandal-Resistant Door Station
·
User Manual
49
You can add many devices at once whose IP addresses are among the IP segment.
Steps:
1.
Click
to pop up the adding devices dialog box.
Figure 8-7
Adding Button
2.
Select IP Segment in the adding mode drop-down list.
3.
Set the Start IP Address and End IP Address.
4.
Input port No., user name, and password.
Figure 8-8
Adding by IP Segment
5.
Click
OK
to search and add the devices whose IP addresses are within the range of the
defined IP segment to the device list.
8.3
Configuring Devices Remotely
In the device list area, select a device and click
or
to enter
the remote configuration interface.
Figure 8-9
Remote Configuration
8.3.1
System
Click
System
on the remote configuration interface to display the device information:
Device Information, General, Time, System Maintenance, and User, and so on.
