Video Intercom Vandal-Resistant Door Station
·
User Manual
55
ID Configuration
Purpose:
To call the door station via the client software or to call indoor stations/the client
software/the master station via the door station successfully, you should number the
door station first. You should set the community No., the building No., the unit No., and
the floor No. for the door station.
The door station supports 2 kinds of device type: villa door station and doorphone.
When it works as a doorphone, there is no need setting the community No., the building
No., the unit No., the floor No. or the device No..
Steps:
1.
Click
Video Intercom
–
>
ID Configuration
to enter device ID configuration interface.
Figure 8-19
Door Station (Villa Door Station series)
2.
Select the device type from the drop-down list, and set the corresponding
information.
3.
Click
Save
to enable the device number configuration.
Note:
For main door station, the serial No. is 0.
For sub door station, the serial No. is larger than 0. Serial No. ranges from 1 to 99.
For each villa or building, at least one main door station should be configured, and
sub door stations can be customized.
For one main door station, at most 8 sub door stations can be customized.
Select doorphone as device type, and the serial No. is not necessary to configure.
Please utilize the doorphone along with the main door station (Villa Door Station
series or Door Station series).
Villa Door Station series door station cannot be used as outer door station.
Time Parameters
1.
Click
Video Intercom
–
>
Time Parameters
to enter time parameters settings
interface.
2.
Configure the maximum speaking duration, and the maximum message duration.
3.
Click
Save
.
