Video Intercom Vandal-Resistant Door Station
·
User Manual
58
Figure 8-23
Volume Configuration
2.
Slide the slider to adjust the volume input and volume output.
3.
Click
Save
to enable the settings.
Call Button
Steps:
1.
Click
Video Intercom -> Call Button
to enter the call button settings interface.
Figure 7-1
Call Button Settings Interface
2.
Check the checkbox of
Quick Press for Calling Center
.
3.
Click
Save
to enable the settings.
Note:
If enabling
Quick Press for Calling Center
, you should call resident by holding
down the call button, and call center by quickly pressing the call button.
Motion Detection
Purpose:
Motion detection detects the moving objects in the configured surveillance area, and a
series of actions can be taken when the alarm is triggered.
Motion detection configuration adopts the same set of motion detection parameters in
the daytime and at night.
Task 1: Set the Motion Detection Area
Steps:
1.
Click
Video Intercom -> Motion Detection
to enter the motion detection settings
interface.
