Video Intercom Vandal-Resistant Door Station
·
User Manual
63
After editing the local network parameters of device, you should add the devices to
the device list again.
Linked Devices Network Configuration
Purpose:
In the linked devices network configuration interface, you can configure the network
parameters of master stations, SIP servers and management centers of the same LAN.
The devices can be linked to the door station and realize the linkage between these
devices.
Steps:
1.
Click
Network -> Linked Network Configuration
to enter linked network configuration
interface.
Figure 8-26
Linked Network Configuration
2.
Input the SIP server IP address, the management center IP address, and the
management center port No..
3.
Click
Save
to enable the settings.
Note:
After adding SIP Server Address IP, the video intercom of same community: video
intercom between indoor stations of different building, calling indoor station from
outer door station and video intercom between management center and indoors.
After adding management center IP Address, the events can be uploaded to the
management center.
FTP
Steps:
1.
Click
Network -> FTP
to enter the FTP parameters interface.
