Video Intercom Vandal-Resistant Door Station
·
User Manual
77
9
Remote Operation via Client Software
The Video Intercom module provides remote control and configuration on video
intercom products via the client software.
Before remote configure and control the video intercom, you are required to add the
device to the software first. Refer to
9.2 Device Management.
For remote configuration of video intercom device via the client software, refer to
9.3
Configuring Devices Remotely via Client Software.
For the picture storage on storage server, refer to 9.4
Picture Storage.
For remote control of video intercom devices, please refer to 9.6
Video Intercom
Configuration
.
9.1
System Configuration
Purpose:
You can configure the video intercom parameters accordingly.
Steps:
1.
Open the System Configuration page:
Control Panel -> Maintenance and
Management -> System Configuration -> Video Intercom
.
2.
Click the
Video Intercom
tab to enter the Video Intercom Settings interface.
3.
Input the required information.
Ringtone
: Click the icon
and select the audio file from the local path for the
ringtone of indoor station. Optionally, you can click the icon
for a testing of the
audio file.
Max. Ring Duration
: Input the maximum duration of the ringtone, ranging from 15
seconds to 60 seconds.
Max. Speaking Duration with Indoor Station
: Input the maximum duration of
speaking with the indoor station, ranging from 120 seconds to 600 seconds.
Max. Speaking Duration with Door Station
: Input the maximum duration of speaking
with the door station, ranging from 90 seconds to 120 seconds.
Card Reader Type
: Select the card reader to issue cards.
4.
Click
Save
to save the settings.
