Video Intercom Vandal-Resistant Door Station
·
User Manual
85
9.4.2
Formatting the HDDs
The HDDs of the storage server need to be formatted for the captured picture storage.
Steps:
1.
Select the added storage server from the list and click
Remote Config
.
2.
Click
Storage->General
to enter the HDD Formatting interface.
3.
Select the HDD from the list and click
Format
. You can check the formatting process
from the process bar and the status of the formatted HDD changes from
Unformatted
to
Normal Status
.
Figure 9-7
Format HDDs
Note:
Formatting the HDDs is to pre-allocate the disk space for storage and the original
data of the formatted HDDs will be deleted.
9.4.3
Configuring Storage Server Picture Storage
Before you start:
The storage server needs to be added to the client software and the HDDs need to be
formatted for the captured pictures storage.
Steps:
