Video Intercom Door Station
·
·
·
·
User Manual
30
7.3
Setting Parameters
You can set the network configuration, local settings, password and volume of the door
station. You can also view the version of the device and issue cards with it.
To set parameters for the door station, you should go to the configuration mode first.
Steps:
1.
Hold down the
*
key and the
#
key for 2s to enter the admin password interface.
2.
Enter the admin password, and press the
#
key.
Figure 7-3
Admin Password Interface
The default admin password is 888999.
Under the configuration mode, press the number key
2
and
8
to switch the parameter
interfaces.
7.3.1
Local Settings
Steps:
1.
Enter the local parameters settings interface.
1)
Press the number keys
4
and
6
to switch to the local settings interface
Figure 7-4
Local Settings Interface
2)
Press the
#
key to enter the local parameters settings interface.
