Video Intercom Door Station
·
·
·
·
User Manual
58
Setting Sub Door Station
Steps:
1.
Select the community, and press the
Sub Door Station
tab to switch to the sub door
station configuration interface.
Figure 8-36
Setting Sub Door Station
2.
Select the door station type from the drop-down list menu: Door Station for Unit, or
Door Station for Villa.
3.
Set the sub door station parameters (sub door station amount, floor No., start IP
address, end IP address), and then click the
Calculate
button to generate the sub
door station end IP address and sub door station No. (like 1-1-1-1) automatically.
4.
Set the linked network parameters for the sub door station: main door station IP
address, SIP IP address, master station IP address, center IP address, center port No.,
subnet mask, and gateway address.
5.
Select an online door station, enter the login password, and click the
Set
button.
The default sub door station floor No. is 1.
