Video Intercom Door Station
·
·
·
·
User Manual
70
9.4
Picture Storage
When the video intercom device is under armed status, it will capture the picture
automatically after unlocking the door. The captured picture can be uploaded and stored
in the storage server.
When starting the live view of door station via VMS-A1, you can capture the live view
picture. The captured picture can be uploaded and stored in the storage server.
This function is only available to door stations.
You are required to add storage server to the VMS-A1, and format the HDDs first
before uploading and storing captured pictures.
9.4.1
Adding Storage Server
Before you start:
The storage server application software needs to be installed and it is packed in the
VMS-A1 software package. When installing the VMS-A1, check the checkbox of
Storage
Server
to enable the installation of storage server.
1.
Click the icon
on the desktop to run the storage server.
2.
Open the Device Management page and click the
Server
tab.
3.
Click
Add New Device Type
, select
Storage Server
and click
OK
.
Figure 9-8
Adding Storage Server Type
